BALISTC
13-12-2004, 06:46 PM
Hey everyone,
Finally got around to taking some pics of my pride and joy..
It had a massive crash about 2 months ago, and since then I havent had the heart to even look at it, so bad was the damage.....I accumulated some bits and pieces, sifted through my mountain of spare parts and dug out what I needed, and I've finally got it back together. Its still a little dirty, but you get the idea :)
Even though the class doesnt exist in this country, I've built it to be competitive in the 1/10 outlaw sport class.
Even though the V-One RRR has been released, and is the current king of touring cars in its class, the V-One RR Evo is still the car to beat in the Outlaw class. This is mainly due to the orientation and design of the body mount setup, which is suited to outlaw shells, and is identical to the body mount setup on 1/8 scale cars.
Here are the mods and work I've done to it.
Sirio Evo 2 5 port .12 outlaw engine
HARD Racing Shark outlaw pipe
Novarossi manifold
Kyosho Team "Takaaki Shimo" Worlds chassis plate
Kyosho Team graphite upper deck
I've also got LOTS of 3 Racing bits on it, including:
Front upper arm mounts
L and R side Chassis stiffener
Slotted brake disc
Aluminium roll bar (much higher than stock, to protect the head on the Sirio)
Graphite Front A Arm plate
Graphite shock tower
Graphite front bumper plate
Alloy hex hubs
Low CG Heat sink engine mounts
Rear shock tower
Brake bar
Alloy pulleys
Reinforced belts
Rear body stay
Rear upper arms
It runs a 1/10 Lola Can-Am shell, but unfortunately it wasnt available for the photos...it also runs Speedmind foam tyres and disc wheels front and back.
I'll try and get some photos of it with the wheels and shell on soon.
http://users.tpg.com.au/balistc/rr1.jpg
http://users.tpg.com.au/balistc/rr2.jpg
http://users.tpg.com.au/balistc/rr3.jpg
http://users.tpg.com.au/balistc/rr4.jpg
http://users.tpg.com.au/balistc/rr5.jpg
http://users.tpg.com.au/balistc/rr6.jpg
http://users.tpg.com.au/balistc/rr7.jpg
Finally got around to taking some pics of my pride and joy..
It had a massive crash about 2 months ago, and since then I havent had the heart to even look at it, so bad was the damage.....I accumulated some bits and pieces, sifted through my mountain of spare parts and dug out what I needed, and I've finally got it back together. Its still a little dirty, but you get the idea :)
Even though the class doesnt exist in this country, I've built it to be competitive in the 1/10 outlaw sport class.
Even though the V-One RRR has been released, and is the current king of touring cars in its class, the V-One RR Evo is still the car to beat in the Outlaw class. This is mainly due to the orientation and design of the body mount setup, which is suited to outlaw shells, and is identical to the body mount setup on 1/8 scale cars.
Here are the mods and work I've done to it.
Sirio Evo 2 5 port .12 outlaw engine
HARD Racing Shark outlaw pipe
Novarossi manifold
Kyosho Team "Takaaki Shimo" Worlds chassis plate
Kyosho Team graphite upper deck
I've also got LOTS of 3 Racing bits on it, including:
Front upper arm mounts
L and R side Chassis stiffener
Slotted brake disc
Aluminium roll bar (much higher than stock, to protect the head on the Sirio)
Graphite Front A Arm plate
Graphite shock tower
Graphite front bumper plate
Alloy hex hubs
Low CG Heat sink engine mounts
Rear shock tower
Brake bar
Alloy pulleys
Reinforced belts
Rear body stay
Rear upper arms
It runs a 1/10 Lola Can-Am shell, but unfortunately it wasnt available for the photos...it also runs Speedmind foam tyres and disc wheels front and back.
I'll try and get some photos of it with the wheels and shell on soon.
http://users.tpg.com.au/balistc/rr1.jpg
http://users.tpg.com.au/balistc/rr2.jpg
http://users.tpg.com.au/balistc/rr3.jpg
http://users.tpg.com.au/balistc/rr4.jpg
http://users.tpg.com.au/balistc/rr5.jpg
http://users.tpg.com.au/balistc/rr6.jpg
http://users.tpg.com.au/balistc/rr7.jpg