grass setup

[stone]

So 2 days befor autum river,I was going to post this.But I didnt want to give away my secret testing results.LOL.

Anyway this was my very basic changes from my normal setup.

Mod Truck

Front tyres; holeshots
Rear tyres; bowties
shock oil; 40
front camber; 0 degrees
rear camber; 2-3 degrees negative
And lastly small movement of batt location to fine tune front/rear grip.

I found this fairly good,and good enough too TQ (thanks doogie,$50 is in the mail)ha ha,and 2nd overall.

Get your setup on ere,just for giggles if nothing else. :D

[stone]

Oh,And I had the punch setting on my speedy set #3 out of 6 to keep the fronts on the ground,and I decided against useing my 4.5 brushless and ran the 6.5,the 4.5 was just way too much.

[James]

grass is a bitch to get setup on... and is hard on motors/speedies :)

[Matt]

Bowties on rear
Ribbed on front.
35 weight oil in the front, 30 in the rear.
Gear down 1-2 teeth

Turn early, and flick the brake juuuust as you hit the corner.

[Boony]

i ran same basic setup for the bj as what i do at wc but change a cple of minor things

blue ae springs all around,let the rear have a s mmuch slop as possible and slowly stiffen the front end up as the day goes on then at race 4 of 5 slop the spring a bit

hadled like a dream with the 19t in there

[BAGES]

hey Boony whats the rc in your avatar?

[Boony]

jconcepts bj4 worlds edition mate