PDA

View Full Version : Squeezers IWaver02

Squeezer
08-03-2005, 07:30 AM
Picked up a iWaver 02 from Aaron ( Azzachaz ) a few days back.

Here it is in all it's glory before being bumped against walls/barriers

Only mod currnently done to it are wheel bearings and alloy wheel nuts. Going to have to do the ball diff mod though
Squeezer
08-03-2005, 07:31 AM
Pic1

e107_files/public/45_iwaver02_1.jpg
Squeezer
08-03-2005, 07:31 AM
Pic2

e107_files/public/45_iwaver02_2.jpg
Squeezer
08-03-2005, 07:33 AM
And finally a short Vid I put together showing it running on my temporary indoor track made from some sheets of MDF 6mm painted with Chalkboard paint for Extra traction

The first few laps of the Vid is with the throttle limited to about 70% ( Nice having prgarammable controllers ) - steering is also at 70% or so.

The donuts afterwards are with it at 100% and steering cranked up fully also

http://www.users.on.net/~selgey/vid/Iwaver.mpg

barriers in use are 13mm Polytube - but I need something better