Clod/Bullhead Crawler Project

[SuperRoo]

I thought I'd post this over here too.

http://members.iinet.net.au/~western4x4/ClodHead/ (http://members.iinet.net.au/%7Ewestern4x4/ClodHead/)

I bought the Bullhead a few years ago with the intention of building it up as some sort of crawler. I know some might think its sacrilege to destroy this old beauty but its never going to be worth much more unless it is a original Clod Buster and it aint.

I had done my research and found to buy a set of brand new diffs on their own was going to cost me about $300 - 350 not including bearings and the rest of the hardware or I could buy a Super Clod for about $450. So I shopped around and found this on eBay for $250.

The chassis arrived today so if I get a spare 30 minutes I'll start chopping it up and install it.

This is where it all starts.

http://members.iinet.net.au/%7Ewestern4x4/ClodHead/SANY0494.JPG

[BIG PETE]

what eva bits your not going to use off the bull head i will grab off ya mate

[SuperRoo]

Chassis is built and installed. I did forget to do something so I'm gonna have to pull it all a part again. I forgot to lock the diff's.

Pete, I am planning on keepin the tyres, wheels front bumper and body so the only things that are left are the chassis, shocks and stock links.

http://members.iinet.net.au/%7Ewestern4x4/ClodHead/SANY0496.JPG

[Mini Crawler]

looking good richard

[BIG PETE]

any thing ya dont want mate i will grab for sure better to have spares

[obzELiTe]

more photos of the chassis needed .


and speaking of clods, i got some tires for mine although they mite be a bit big.

http://i7.photobucket.com/albums/y267/obzelite/TA/photo4.jpg

[SuperRoo]

I'll be running 2.2" wheels on mine with the stock plastic axles.

Plus I want to throw down the challenge to the Berg/Gladiator boys, let them see what their missing out on. :D