SuperRoo
02-01-2010, 09:46 AM
SJ have a new Charger on the block to compete with the high end Hyperion chargers @ a fraction of the cost. It is a 2 Channel 300 watts unit. Being able to charge my packs @ 2C, 3C or 4C is great. Or being able to charge my higher (than 5000mah) capacity packs at the rated current of the pack great too.
Description: SJ ABSOLUTE 1807 DUAL OUTPUT DC CHARGER WITH BUILT IN LI-PO BALANCER. 300w-Plus-300w TWIN CHARGER
State of the art Charger, Discharger and Cycler.
Compatible with NiCd / NiMH / LiPo / Lilon / LiFe / Pb batteries
Features and Specifications:
Integrated JST-EH balancer ports
Two (2) adaptor Boards
Each Output Suppoyrts :
Li-Ion/Li-Po/Li-Fe 1-7 cells
Ni-Cd / Ni-MH 1-8 cells
Lead-Acid 2-24 Volts
Charge Rate 0.1-20 Amps (Max 300w)
Discharge Rate 0.1-10 Amps (Max 50w)
DC Input 11-28Volts
20 Memories Per Channel
Safety Timer
Temperature Sensor
Trickle Current NiCD / NiMH Off-500 mah
Peak Sensitivity NiCd - 5-25mV/cell NiMH 0,3-15mV/cell
Three (3) internal cooling fans
USB Port
Price: $285
http://www.modelengines.com.au/view/page/27/item/SJ-1807DC.html
Description: SJ ABSOLUTE 1807 DUAL OUTPUT DC CHARGER WITH BUILT IN LI-PO BALANCER. 300w-Plus-300w TWIN CHARGER
State of the art Charger, Discharger and Cycler.
Compatible with NiCd / NiMH / LiPo / Lilon / LiFe / Pb batteries
Features and Specifications:
Integrated JST-EH balancer ports
Two (2) adaptor Boards
Each Output Suppoyrts :
Li-Ion/Li-Po/Li-Fe 1-7 cells
Ni-Cd / Ni-MH 1-8 cells
Lead-Acid 2-24 Volts
Charge Rate 0.1-20 Amps (Max 300w)
Discharge Rate 0.1-10 Amps (Max 50w)
DC Input 11-28Volts
20 Memories Per Channel
Safety Timer
Temperature Sensor
Trickle Current NiCD / NiMH Off-500 mah
Peak Sensitivity NiCd - 5-25mV/cell NiMH 0,3-15mV/cell
Three (3) internal cooling fans
USB Port
Price: $285
http://www.modelengines.com.au/view/page/27/item/SJ-1807DC.html