PDA

View Full Version : Counter Steer Drifting


eichkay
14-02-2010, 07:34 PM
1min38sec's of the my HotBodies TC-D modified to be counter steer ... Over driving the rear wheels by 87% FDR on the front is 3.0 yet the rear runs at 1.6 makes for realistic rc drifting...

fJiH3Rv7gJ4

jonnysikrx3
14-02-2010, 09:24 PM
nice vid mate, looks like you got that thing setup sweet now..

booked
24-07-2010, 08:56 PM
Nice! I wanna set up my ta05 with CS... eddy you still got that ta04 diff lying around?

inertia
25-07-2010, 10:34 AM
I do like the body! If you had it in a four door, and Watanabee's on it, it would look like my daily driver!

http://i216.photobucket.com/albums/cc177/inertiadr650/PIC3.jpg

I do like the overdrive rear idea, makes it much more relaistic to watch!

eichkay
25-07-2010, 06:28 PM
I do like the body! If you had it in a four door, and Watanabee's on it, it would look like my daily driver!

http://i216.photobucket.com/albums/cc177/inertiadr650/PIC3.jpg

I do like the overdrive rear idea, makes it much more relaistic to watch!

You don't happen to work at komatsu do you.

KingBob
25-07-2010, 07:19 PM
Dont all drifters counter steer anyway?

obzELiTe
25-07-2010, 09:02 PM
irl yes, in rc you need to gear up the rear to make it spin more than the front wheels to get the same look othewise its just a balancing act between steering into a turn and counter steering and just pointing forwards.

inertia
26-07-2010, 09:51 AM
You don't happen to work at komatsu do you.


I do actually, how'd you know?

eichkay
26-07-2010, 09:59 AM
I do actually, how'd you know?

I was drooling over your car in the carpark a few weeks back... I'm a CSSR in parts section.

inertia
26-07-2010, 10:28 AM
aahhh, yeah, the car has taken a few months to get going as i had to adapt a SR20 powerFC dejtro to the FJ20, as the stock FJ20 ecu couldnt cope with the HKS turbo setup and 800cc injectors. Never changed a dizzy to a CAS, so that was fun.

I work in the wheelmotor overhaul section in REMAN.

Mijy
25-05-2011, 03:09 AM
Back to CS, is it easier to drift with? And how do you set up the ratio? is it all done by gearing?

eichkay
25-05-2011, 10:44 AM
Back to CS, is it easier to drift with? And how do you set up the ratio? is it all done by gearing?

Its harder to drift a CS setup... Some guys that have been rc drifting for 2+ years cant do it, you'll either pick it up or fail to do so.

To CS a drifter you have to alter the front and rear drive ratio's on my Hot Bodies TC-D im running the standard front diff pulley 39t with a 14t pulley driving it , for the rear end ive got a 32t pulley with a 20t pulley driving it.. my front and rear wheels drive at different speeds , the rear turns 1.87 to a single 1.00 turn at the front.

Mijy
25-05-2011, 02:14 PM
Ahh so it has to be done with the pulleys? So its impossible to do it with a e10 which uses a drive shaft and gears?